1500V high quality raba junction akwatin PV-BN3H1

1500V babban ingancin rabe junction akwatin PV-BN3H1 Featured Hoton

Takaitaccen Bayani:

Wannan akwatin junction na hasken rana yana ɗaukar cikakken Potting-manne, mai hana ruwa, kuma TUV ya tabbatar da shi.Ya dace da kowane nau'in crystal silicon rabin cell (a ƙarƙashin nau'in 166) . Akwatin junction ya dace da tsarin haɗin baya na module. Akwatin junction na iya rage yawan wutar lantarki na PV kayayyaki kuma inganta amincin lantarki.

Aika mana imel

Cikakken Bayani

Tags samfurin

Bayani

Bayanan fasaha

Ƙarfin wutar lantarki	1500V	Ajin harshen wuta	UL94-V0 (TUV)/5VA(UL)
Ƙididdigar halin yanzu	20 A	Bayanin Kebul	4mm ku²
Yanayin aiki	-40°C-+85°C(TUV)/-40°C-+90°C(UL)	Tsarin hana ruwa	Yin tukwane
Ajin aminci	Darasi na II	Ƙididdiga mai hana ruwa	IP68
Matsayin aikace-aikacen	Darasi A	Yawan Manne Potting	12g x3
Matsakaicin faɗin mashaya bas	9mm ku	Busbar haɗin ion	Sayarwa
Abubuwan da ke rufewa	PPE	Abubuwan Tuntuɓi	Copper, Tin-Plated ,

Jerin Kanfigareshan Samfur

Diode Rated Voltage	20 A
Nau'in Diode	Saukewa: SB3045
Diode Qty	3

Aikace-aikace

Wuraren hasken rana mara garkuwa don batir ɗin fim na bakin ciki don inganta ƙarfin hasken rana

Magani

● Dole ne a bi jeri na kintinkiri na PV module tare da ramin hawan JB na tushe.

● Maɗaukaki da mahaɗar hatimi, dole ne a yi amfani da mannen tukunyar ta amfani da takamaiman nau'i da ƙayyadaddun bayanai.Tabbatar cewa za a gyara JB a daidai matsayi da abin dogara.Matsayin mannen tukunya ya kamata ya kasance saman saman saman Diodes da tushe mai tushe.Don gujewa haɗarin girgiza wutar lantarki.

● Kada a matsar da PV module ko JB kafin manne da hatimin fili ko manne tukunyar tukwane.

● Tabbatar da siyarwa tsakanin Ribbon da tasha da dogaro da gaske don gujewa batan saida ko siyar da karya.Dole ne masu aikin siyar da kayan aikin su kasance masu horarwa da ƙwarewa.Ƙarin lokacin sayar da diode zai haifar da lalacewa.

● Ɗauki matakan kariya na anti-static lokacin taɓawa ko siyar da JB.

● Tabbatar da hanyar haɗin kai tsakanin JB da PV module a daidai polarity.In ba haka ba, haɗin da ba daidai ba zai haifar da wuta.

● Maƙerin PV ya kamata ya duba diodes na JBs kafin jigilar kaya tun da diodes na iya lalacewa ta hanyar zafin rana ko girgiza.

● Ya kamata ƙwararrun ma'aikata su yi aiki da shigarwa ko kulawa.

● Don kariya daga girgiza wutar lantarki, yayin da ake hadawa ko tarwatsewa, tabbatar da keɓance masu haɗawa da wutar lantarki.

● Kada a haɗa ko yanke haɗin gwiwa a ƙarƙashin kaya.

● Yayin aikin haɗin gwiwa, kiyaye mahaɗin daga duk wani abu mai lalacewa.

Hankali

1. Gudanar da kulawa yayin sufuri ba tare da lalata samfurin ba.
2. Lokacin shigar da akwatin junction, tabbatar da cewa hasken rana ba ya aiki kuma ba za a iya taɓa ginshiƙai masu kyau da mara kyau ba a lokaci guda don guje wa girgiza lantarki da katsewar diode.
3. Kada ka haɗa tabbatacce da korau na akwatin junction guda a kowane lokaci.
4. Sai dai don kiyayewa, kar a toshe da cire masu haɗawa masu kyau da mara kyau akai-akai, in ba haka ba aikin rufewa zai ragu.
6. A lokacin shigarwa, silicone za a yi amfani da shi a ko'ina a kan tushe na akwatin junction don hana yaduwa.
7. Dole ne a kiyaye rubber mai tsabta kuma ba tare da mannewa a lokacin haɗuwa ba, in ba haka ba za a yi tasiri na tasiri na panel.
8. Akwatin junction na PV da mai haɗawa kada su taɓa paraffin, kamar mai, mai mai, electroslag da sauran abubuwan paraffin.