Cikakken potting IP68 mai hana ruwa bakin ciki junction akwatin PV-BN3H1C

Takaitaccen Bayani:

Yana ɗaukar cikakken Potting-manne, mai hana ruwa, ƙirar amfani da waje tare da amincewar TUV.Dace da cadmium telluride, jan karfe indium gallium selenium, perovskite, amorphous bakin ciki batura.Akwatin haɗin gwiwa ya dace da tsarin haɗin baya na bangaren baya.A halin yanzu, Akwatin junction na iya rage yawan amfani da wutar lantarki na PV module da inganta amincin lantarki.

Aika mana imel

Cikakken Bayani

Tags samfurin

Goyon bayan sana'a

MATSALAR MATSALAR (TA = 25 ℃ sai dai in an lura) (TA = 25 ℃, ）
PARAMETER	ALAMA	15SQ045	UNIT
Matsakaicin matsakaicin jujjuyawar wutar lantarki	VRRM	45	V
Matsakaicin ƙarfin lantarki na RMS	VRMS	31.5	V
Matsakaicin ƙarfin toshewar DC	VDC	45	V
Matsakaicin matsakaicin gaba gyara halin yanzu	IF (AV)	15.0	A
Kololuwar ci gaba mai tsayi 8.3ms guda rabin sine_wave wanda aka fifita akan kima @ 60Hz	Farashin IFSM	350	A
Kewayon yanayin mahaɗar aiki	TJ	-55 zuwa +200	℃
Ma'ajiyar zafin jiki	TSTG	-55 zuwa +200	℃

Jerin Kanfigareshan Samfur

Diode Rated Voltage	10 A
Nau'in Diode	10A10
Diode Qty	1-2

Aikace-aikace

Wuraren hasken rana mara garkuwa don batir ɗin fim na bakin ciki don inganta ƙarfin hasken rana

Magani

● Dole ne a bi jeri na kintinkiri na PV module tare da ramin hawan JB na tushe.

● Maɗaukaki da mahaɗar hatimi, dole ne a yi amfani da mannen tukunyar ta amfani da takamaiman nau'i da ƙayyadaddun bayanai.Tabbatar cewa za a gyara JB a daidai matsayi da abin dogara.Matsayin mannen tukunya ya kamata ya kasance saman saman saman Diodes da tushe mai tushe.Don gujewa haɗarin girgiza wutar lantarki.

● Kada a matsar da PV module ko JB kafin manne da hatimin fili ko manne tukunyar tukwane.

● Tabbatar da siyarwa tsakanin Ribbon da tasha da dogaro da gaske don gujewa batan saida ko siyar da karya.Dole ne masu aikin siyar da kayan aikin su kasance masu horarwa da ƙwarewa.Ƙarin lokacin sayar da diode zai haifar da lalacewa.

● Ɗauki matakan kariya na anti-static lokacin taɓawa ko siyar da JB.

● Tabbatar da hanyar haɗin kai tsakanin JB da PV module a daidai polarity.In ba haka ba, haɗin da ba daidai ba zai haifar da wuta.

● Maƙerin PV ya kamata ya duba diodes na JBs kafin jigilar kaya tun da diodes na iya lalacewa ta hanyar zafin rana ko girgiza.

● Ya kamata ƙwararrun ma'aikata su yi aiki da shigarwa ko kulawa.

● Don kariya daga girgiza wutar lantarki, yayin da ake hadawa ko tarwatsewa, tabbatar da keɓance masu haɗawa da wutar lantarki.

● Kada a haɗa ko yanke haɗin gwiwa a ƙarƙashin kaya.

● Yayin aikin haɗin gwiwa, kiyaye mahaɗin daga duk wani abu mai lalacewa.

Umarnin shigarwa

1.Samu akwatin junction da gindinsa ta hanyar zane mai laushi mai tsabta tare da barasa.
2.Panel back-sheet A kan, bushe, babu mai da sauran datti.Tsaftace yankin takardar baya ta a
tsabta mai laushi mai laushi tare da barasa.
3. Miƙe robar ta hanyar pincers, ajiye a tsaye da takardar baya.
4.Get silicon kwalban, yanke bakin kwalban, tabbatar da diamita shine 4mm, saka shi a cikin bindigar iska, murfin murfi, babu yanke a bakin bindigar iska.
5. Sanya akwatin junction akan teburin aiki, samun bindigar iska kuma ci gaba da tsayawa a kan tushen akwatin junction, gluing a kusa da da'irar akwatin tushe mai tushe.
6.Get da roba ta wurin junction akwatin tushe rami, danna da wuya da junction akwatin a baya-sheet har silicon ambaliya a kusa da.
7.Place panels fadin a cikin iska igiyoyin ruwa 10 hours har silicon warke.
8.Duba amincin kowane haɗin tasha, kuma danna madaidaicin tashar bas akan tashar haɗin da hannu.
9. Rufe akwatin junction tare da danna sautin, bai kamata a zabo shi da hannu ba.

FAQ

1) Shin ku masana'anta ne ko kamfani na kasuwanci?
Muna da namu masana'antu.

2) Menene tashar FOB ku?
FOB Shanghai, kuma za mu iya bisa ga abokin ciniki bukatun.

3) Menene lokacin bayarwa?
Kwanaki 3-7 don samfurori, kwanaki 10-30 don adadi mai yawa, bisa ga odar ku.

4) Yaya game da sabis ɗin bayan-sayar ku?
Za mu iya ba ku lokaci da mafi kyawun sabis na tallace-tallace.Yanzu mun gina dangantakarmu a kasashe da yawa na ketare kamar Brazil, Pakistan, Japan da Jamus.Yana sa sabis ɗinmu na bayan-tallace ya zama mai sauƙi da tasiri don isa gare ku.Hakanan sabis ɗin bincike na kan layi na sa'o'i 24 yana samuwa.

5) Zan iya samun tambarin kaina akan samfuran ku?
Ee, sabis na OEM&ODM yana samuwa.

6) Yadda za a tabbatar da ingancin samfuran ku?
Samfuran mu suna da UL, TUV, IEC, RoHs, SGS da sauran takaddun shaida.